How To Change AquaBliss Shower Filter

How to change AquaBliss shower filter

How To Change AquaBliss Shower Filter

Hard and contaminated water is a problem for a lot of people nowadays. Hard water contains excess minerals which can cause itchy and dry skin. Moreover, it can also lead to hair fall. The contaminants in water such as heavy metals including lead, mercury, chromium, copper, zinc, bacteria, viruses can be a significant problem for you. Water purifiers can provide you safe drinking water but for good skin, a shower filter is important too.

AquaBliss shower filter is one of the best shower filters with a multi-stage filtration system that can reduce dry and itchy skin. Moreover, it filters out 99% of water contaminants. However, if you are having a problem while replacing its filter don’t worry! In this article, we have given a detailed guide on how you can easily change the AquaBliss shower filter on your own with some general information regarding this shower filter.

How to change AquaBliss shower filter

How to change AquaBliss shower filter

When should I change the water filter cartridge?

The cartilage should be changed every 6 months as specified by the manufacturer AquaBliss. However, depending on your usage it can be safe for 8 months or for 3-4 months. However, do not use the filters after a long time. You can know it’s time to change the cartridge when your soap won’t lather much, your skin may feel dry and the water will smell of chlorine or your hair may experience breakages and thinness.

Now let’s move to a step-by-step guide on how you can change an AquaBliss shower filter cartridge on your own.

Step 1: Remove the showerhead from the shower arm by slowly unscrewing it. Now, open the shower filter, you can see a used old filter cartridge in it.

Step 2:take out the used filter cartridge and make sure the inner sides are clean. Otherwise, throw the debris out and wash it with water and some mild soap.

Step 3: Now, there are two sides in a cartridge, one is the mesh side and the other one has pores. Place the new filter cartridge such that the mesh side is facing upwards and the pores one is facing downward.

Step 4: close the water filter with the new filter cartridge inside it. Do the same you did while opening the showerhead. Make sure it is tight enough for no leakages to happen.

Step 5: Once you have replaced the old filter cartridge with a new one, attach the showerhead to the arm. Moreover, make sure there are no leaks and the shower arm is clean from inside. Otherwise, clean it before attaching.

Step 6: they recommended it to run water through the newly replaced filter for a minimum of 60 seconds. Don’t worry if you see some black dust coming out with discolored water. It is the carbon dust that is totally normal. It will get back to normal after a minute.

Step 7: do not throw away the discolored water. You can use it for watering your plants.


What does AquaBliss shower filter remove?

AquaBliss shower filters can remove heavy metals, harmful chemicals, bacteria and viruses, and unpleasant odours too.

How long should a shower head filter last?

A shower head filter should last for up to 6 months or to be precise 10,000 gallons without replacing the filter cartridge.

Can shower filters soften water?

No, they can’t soften the water. To some extent, they can remove the hardness, but they can’t fully make it soft. You will need a separate water softener for that purpose. Shower filters can only filter out water contaminants.

Does the shower filter stop hair loss?

Yes, shower filters can help you out if you are experiencing hair loss because the contaminants in the water can be the reason for you losing hair.


That’s how you change the filter cartridge from your AquaBliss shower filter. They are easy to install and are a really good investment. Many skin and hair problems may be solved by simply using this AquaBliss shower filter because it can reduce the harmful chemical compounds and heavy metals from the water. Moreover, the filters last for 6 months.

Water purifiers are also as important as shower filters because the water you drink affects your health and lifestyle. Check out our articles on top 10 best fluoride water filters of 2021 and top 10 best water filter pitchers of 2021 to choose the best option and never compromise on your health. Moreover, if you are experiencing hard water issues check out our article- how to filter hard water.

When To Change The Water Purifier Filter?

When To Change The Water Purifier Filter?

Water purifiers are the need of today’s world. With the increasing levels of pollution, the water quality is degrading day by day. If this water is consumed without treatment, it may lead to serious health problems. Water purifiers remove 99% of contaminants including heavy metals, hazardous chemicals, deadly viruses, and many more.

You should definitely get a water purifier if you don’t have one because it is an excellent investment for a healthy life. Check out our article- top 10 best fluoride water filters of 2021 and get one of these best water purifiers.

When to change the water purifier filter?

When to change the water purifier filter

If you are still in search of a good water purifier and collecting information about them, then you are at the right place. In this article, we will let you know the exact time of changing your water purifier filter and some extra information about water purifiers too.

How long do water purifier filters last?

The lifespan of a water purifier filter is already specified by the manufacturer. Check out the user manual of your water purifier and the exact time period will be given to it. Some filters work for 6 months and some only work for a month or two. It will be good if you get the one with a 6-month lifespan. Moreover, the water capacity such as 1000 gallons or 150 gallons is specified in its user manual.

Additionally, some water purifiers have an electronic indicator or a sticker indicator which will let you know the perfect time for changing the water purifier filter. However, if you don’t replace the filters on time, the purifier might stop working due to overuse.

You can store these filters for as long as you need. There is no expiry date for them until they are sealed in their pouch. Once you tear off its seal, you have to use it within the given time period. Otherwise, it may get wasted. Moreover, do not use the filter for a long time. There is a possibility of mold growing inside it which can have serious health hazards.

If your water purifier shows any of these signs, you should replace its filter right now

  1. The water tastes bad as compared to before.
  2. If you smell chlorine or any other chemical in your drinking water
  3. The flow rate of the water has decreased.
  4. There are some contaminants in the water.
  5. The time span of the filter has already completed
  6. The indicator shows that the filter is completely used.

How do water purifier filters work?

There are many types of purification methods but the most used methods are the ion exchange purification method and the reverse osmosis purification method, also known as the RO method. Check out our article on how long do RO filters last.

  • Ion exchange purification method:

The ion exchange method is mostly used to treat hard water so that the calcium and magnesium ions are exchanged with the ions of potassium or sodium which makes it softer and easier to use. The ion exchange method is used in water softeners. For more information, check out our article on how to filter hard water.

  • Reverse osmosis purification method:

The reverse osmosis purification method, also known as RO, uses a semi-permeable RO membrane through which water molecules are forced with pressure. Therefore, the water contaminants get separated from the water and we get purified water. It can remove up to 99% of water contaminants. For more information, check out our article- how long do reverse osmosis filters last.

Tips for maintaining a water purifier

  • Keep the purifier clean from outside as well as inside. Make sure you clean the water purifier at least once a month so the contaminants do not get accumulated inside the purifier for a longer time.
  • Change the RO filters as per the specified time period as it is good for your health and for the purifier too. Otherwise, the water quality goes on worsening as time goes.
  • Make sure you do the servicing of your water purifier at least once in two months. So that it will go on working for a longer time.
  • Do not use an old unpacked filter after a long time there may be molds and bacteria growing inside it


Water purifiers work with consistent efficiency to provide us with excellent quality and safe water. It is important to maintain them for good working. In this article, we have given detailed information on when is the right time to replace the water purifier filters as per our personal experiences and global surveys. So that you can get genuine information. We also have other articles regarding water purifiers including- top 10 best fluoride water filters of 2021 and the top 10 best water filter pitchers of 2021. Water purifiers are easy to use and install but make sure you have the best working water purifier. You can refer to our articles for a detailed review.

How To Filter Hard Water?

How To Filter Hard Water?

Many of you might be facing the same hard water issues as us. Hard water is not at all potable because it has a high mineral content which can lead to serious health hazards including stone formation in kidneys. Moreover, hard water can’t be used for doing laundry or any chores because the magnesium and calcium bicarbonates in the hard water react with the soap and do not form lather and make it harder for you to remove dirt particles from the clothes. Moreover, a soap scum is formed which wastes the soap.

How To Filter Hard Water?

Additionally, hard water can clog drains and block hot-water pipes as a result of the formation of precipitate layers inside them. Moreover, hard water can waste resources such as fuel and soap. Therefore, it will be better if you turn it into soft water before use.

In this article, we will guide you on how to filter hard water with easy methods at home so that you can have a healthy life and simple work. Moreover, this article also includes some general information regarding hard water.

How to filter hard water?

First of all, what is hard water?

Hard water may look like normal water but it contains more amounts of minerals as compared to normal water which needs to filter out using different methods we would discuss further in this article.

There are two types of hardness, namely: temporary hardness and permanent hardness

Temporary hardness

Temporary hardness in water means the water contains a high quantity of bicarbonates of magnesium and calcium, which makes it harder to use for normal usage. It can be removed easily by simple procedures.

Permanent hardness

Permanent hardness in water means the water contains high quantities of calcium sulfates and magnesium sulfates, which do not form a precipitate even after boiling. It requires complex procedures as compared to permanent hardness.

How to find the hardness of water?

How to filter hard water

Refer Image

It is important to know if your tap water is hard or not so that you can decide the right way to treat it. You can easily know if the water is hard if the soap does not form a lather, there is a residue on your taps and shower or if you have dry skin.

Moreover, you can also buy a hard water testing kit from your nearby store to know the level of hardness of the water. They come with strips that change color as per the hardness levels of water, you simply have to match the color with the given color chart.

Here are some of the methods you can try out at home to filter out hard water

Boiling the water

Boiling the water can only remove the temporary hardness. If your tap water has bicarbonate minerals, then they would form carbonates by reacting with the heat and will give you soft and potable water after cooling. There will be a precipitate lying at the bottom of the boiling vessel which forms when the bicarbonates react with heat. Boil the water in a metal container until it reaches its boiling point and let it cool for some time.

Add washing soda

You can use washing soda while doing laundry. Simply add some washing soda to the water so that it reacts with the bicarbonates and sulfates of calcium and magnesium and forms a precipitate that gets settled at the bottom. You can filter it out if you want. This method works for temporary as well as permanent hardness.

Use a water softener

Water softeners are similar to water filters however, they remove the excess amount of minerals by a process called ion exchange. That means the magnesium and calcium ions are exchanged with sodium or potassium ions, which makes the water softer. It can remove permanent hardness easily. You can use this water for drinking purposes after purifying it.

Water softeners come in a wide range of variety and prices too. The price range varies from $300-$4000 as per the quality and features. You can also buy a combo pack of water softeners and a reverse osmosis water filter to purify the water because water softeners do not remove other harmful contaminants. Moreover, they also add sodium and potassium ions. You can also buy a saltless water softener. Check out our article on the top 10 best fluoride water filters of 2021.

Basically, there are 3 types of water softeners, namely: potassium chloride water softeners, sodium chloride water softeners, and saltless water softeners.


Can boiling remove the permanent hardness of water?

No, boiling can remove only temporary hardness because the sulfates do not react with heat like bicarbonates which precipitate at the bottom. You can check other methods in this article for treating permanent hardness.

Is hard water bad for your skin?

Yes, hard water can affect your skin severely. It can cause irritation and dryness because of its mineral content. Moreover, you may experience hair fall too.

Do water filters remove hardness?

No, a water filter can only purify your water by removing the contaminants. You will require a water softener for removing the hardness. Moreover, you can use a water filter for the purification process.

 How to remove the hard water patches on household items?

You can use vinegar mixed with water for removing those dark patches on your kitchen sink and clothes. Moreover, for the hard water residue simply apply some vinegar on the taps and showerheads.


Investing in your health is as important as having any other expensive things. Because you can lead a healthy and happy life. Drinking hard water has various health hazards. Moreover, it can lead to kidney failure too. Therefore, do invest in water softeners or any other methods to remove the water hardness. The soft water has high sodium or potassium content so you will require a water filter for filtering those salts out. Check out our articles- top 10 best water filter pitchers of 2021 and top 10 best fluoride water filters of 2021 for a detailed and genuine review of the best products.

How Long Do Reverse Osmosis Filters Last?

How long do reverse osmosis filters last?

How Long Do Reverse Osmosis Filters Last?

Filters with reverse osmosis purification methods are getting popular day by day because of the degrading quality of water. However, it is a bad sign but these water purifiers can help you out. Reverse osmosis filters also known as RO filters are easy to use, install and save money. Moreover, they are fast and can remove 99% of water contaminants, including chemical compounds, heavy metals and bacteria. Many of you may be thinking of buying a RO water filter. You are absolutely at the correct place. In this article we will let you know the exact lifespan of RO filters with some general information about these filters which is based on our global surveys.

How long do reverse osmosis filters last?

Check out our article on top 10 best fluoride water filters of 2021 in this article all the listed filters use RO purification method.

How long do reverse osmosis filters last?

What is RO?

How long do reverse osmosis filters last?

RO is the shortened form of reverse osmosis. It is a purification method used in various water filters today. The water is passed through a semipermeable membrane also known as RO membrane in filters with pressure so that the contaminants are filtered out easily. Reverse osmosis water purification methods can remove 99% of water contaminants, including heavy metals such as lead, zinc, copper, mercury hazardous chemical compounds, viruses and bacteria.

How to RO (Reverse osmosis) filters work

RO filters have filters which need to be replaced after a certain time period. There are different stages of filtration in the RO purification method. This is a long process with many filters in between so it takes some time to process. First of all RO filters have pre filter membranes which removes bigger impurities such as stones, sand and make sure the RO membrane will only get safe water.

Now, when the water reaches the RO membrane, it is free of bigger contaminants. The water molecules are forced through this reverse osmotic semipermeable membrane with high pressure so the heavy metals such as lead, mercury, copper, zinc chromium and harmful chemical compounds such as fluoride, chlorine are removed.

After getting passed through the RO membrane now it’s time for the post filter, also called as carbon filter which makes sure there are no contaminants left in the water so that you can have safe and healthy drinking water. Many RO water filters also have a remineralization system which makes sure the good minerals such as calcium and magnesium are added in the water.

For what time do RO filters work efficiently

How long do reverse osmosis filters last?

The lifespan of an RO filter totally depends on your usage and the time specified by its manufacturer. Reverse osmosis water purifiers can last until they are in excellent condition and with no breakage. Moreover, many manufacturers also have replacement and recycling programs so do make sure your purifier has the service. The filters inside the purifiers need to be changed frequently.

Depending on your manufacturer and your usage, the filter life may vary. Check out your water purifier user manual to know the exact time for which you can use the filter. Some filters can be used for a year, 6 months and some for only a month. Moreover, the water capacity such as 1000 gallons will be specified. Some RO water filters also come with an electronic indicator which tells the exact time to change the water filters.

Additionally, if your filter doesn’t have an indicator, change the filter as per the time specified by the manufacturer. If you don’t change the filters on time, the water quality will be degraded. Moreover, it will not be purified and taste bad. Therefore, replace those filters frequently.

You can store these filters for as long as you need. There is no expiry date for them until they are sealed in their pouch. Once you tear off its seal, you have to use it within the given time period. Otherwise it may get wasted. Moreover, do not use the filter for a long time. There is a possibility of mold growing inside it which can have serious health hazards.

Tips for maintaining your RO filter

  • Keep the filter clean from outside as well as inside. Make sure you clean the water purifier at least once a month so the contaminants do not get accumulated inside the purifier for a longer time.
  • Change the RO filters as per the specified time period as it is good for your health and for the purifier too. Otherwise the water quality will get bad as the time goes. Check out our article on when to change a water purifier filter for a detailed guide.
  • Check for the leakages, if you can’t manage them on your own call a water filter technician or the brand help centre given on the user manual as soon as possible. Moreover, make sure you do its servicing on a monthly basis.


RO water filters come in a variety of shapes and sizes. Moreover, the price range is wide so that anyone can afford them. Check out our article on small water filter pitchers- top 10 best water filter pitchers of 2021. In this article we have given the exact time and some general information and maintenance tips for your RO filter. They are easy to use, can be maintained easily. Moreover, it is an excellent investment. However, RO purification techniques also filter out minerals such as calcium, magnesium which are important for our human body. Therefore, make sure your water filter has a remineralization system which adds these minerals in water again.

Common Types of Water Filters

Type of Water FILTER

Water is the basic human need essential for the survival and healthy life. In the modern era, pollution has affected our lives in many ways, and we bring different types of water filters to purify the water. It has become really difficult to get pure and clean water; boiling the water is not enough.

In addition, we need a purification system to clean our water from all the impurities and added metals to make it healthy and drinkable without causing any significant damage to our health and body. There are multiple methods to clean water and purify it.

Moreover, all these have got some practical difficulties, their own benefits, and some drawbacks as well. That can be sorted out on the local level. You can decide about the filtration method according to the type of water supply, piping system, contaminants in the water, and most importantly, your budget.

Here are multiple types of water filters, their specific properties, and some pros and cons to help you decide the better one

Common Types of  Water Filters How They Work

Type of Water FILTER



Types of Water Filters

This is a mechanical method of water filtration.  It removes all the solid particles, including dust, rust, debris, and even tiny bacteria, through the process of filtration. Further, it consists of the mesh made up of polypropylene in most cases, and the size of the pores of this mesh determines the strength of the filtration and water flow rate.

Additionally, the size of the pore ranges from 1 micron to 100 microns. The smaller the pore size, the more effective filtration occurs. It removes minor impurities from the water. The mesh, which has a porous size of 0.5 microns, can filter microscopic cysts of some organisms and make water purest and healthier.

Moreover, sediment filtration is an important step in many industrial filtration processes to increase the membrane life of other filtration methods.

  • Convenient to use and replace
  • Pocket friendly
  • Range of micron sizes available
  • It doesn’t remove chemical contaminants
  • Needs other filtration precesses to be added



These carbon filters are porous and positively charged. It absorbs the contaminants effectively due to the porous surface. Further, a positive charge on these particles helps to remove negatively charged chlorine, chloramine, and volatile organic compounds. In addition, it can reduce bacterial growth and removes bacterial cysts from the drinking water.

Moreover, it helps to improve the taste and smell of the drinking water. It purifies the drinking water and improves its quality as well. The large porous surface provides a large surface area and helps remove any impurities from the water through adsorption.

Further, activated carbon is found in two forms in the filtration process, i.e. carbon block and activated granulated carbon. This carbon block or granulated carbon can be used in many prefiltration systems in housing filtration systems or different industries.

  • Removes chlorine contaminants
  • Maintains high water flow rate
  • Pocket friendly
  • Multipurpose usage
  • Keeps water odorless
  • Cant remove solid particles
  • Ineffective against viruses
  • It can not remove dissolved minerals


type of water filter

This filtration system is made of Aluminium oxide ( Bauxite). A highly porous and absorptive material to purify water from Flourine, Thallium, Selenium Arsenic.

Furthermore, this filtration method is more useful in households where fluoridated water is supplied or the areas where water has high arsenic content.

  • Removes 99% fluoride from water
  • Effective against Arsenic, selenium, and thallium
  • It can be regenerated
  • Risk of Aluminium leaching


type of water filter

The ion exchange method is mainly used in areas where hard water is the main problem. It makes washing and bathing difficult. Plus, in many filtration systems, the double ion exchange system uses anionic and cationic exchanges separately to remove undesired cations and anions from water.

Further, a beaded resin present removes the undesirable substance from the water running through it by a chemical reaction. In anionic exchange, negatively charged fluorine, Arsenic, and nitrate exchanges with the desirable ions like chlorine.

On the other hand, magnesium and calcium are exchanged with sodium or hydrogen, and among these, hydrogen is preferred because additional sodium in water causes increased cardiovascular disease risks.

Moreover, when ion exchange resin is fully used, it can be regenerated by adding brine (sodium chloride solution) or hydrochloric acid in it.

  • Removes calcium, magnesium, and many other positively charged materials.
  • Removes fluorine, Arsenic, and many other negatively charged materials.
  • Pocket friendly
  • Regenrateable
  • Doesn’t remove sediments
  • Enhances bacterial growth
  • Might increase the sodium content of water


type of water filters

This is the most natural form of purification of water. It implies the method of boiling, evaporation, and condensation. This process is slower however provides the purest form of water free of all kinds of contaminants. It can filter calcium, magnesium, fluorine, chlorine, nitrates, and organic contaminants left behind during the process of boiling and discarded.

However, leaving behind the volatile compounds that vaporize with water. This costly and time-consuming process is mostly used at the industrial level.

  • The purest form of water
  • Removes the majority of water contaminants
  • Kills bacteria
  • No cartridge removal or change needed
  • Slower process
  • Quite an expensive method
  • removes essential minerals from water
  • distilled water taste


type of water filters

This filtration method implies a semipermeable membrane that removes all the contaminants from the solvent (water). It cleans the impurities and makes it pure as a safe drinking option. Usually, the osmosis removes the solvent from the solute; however, the solute is removed from the solvent; that’s why reverse osmosis takes place.

Furthermore, the membrane is usually polypropylene material with a size up to 0.0001 microns. It enables it to separate all organic and most inorganic compounds, bacterial products, viruses, and minerals from water.

There is a large amount of wastewater in the form of brine that comes with product water almost in ratio 3:1. There is a risk of damage to the filtration membrane by chlorine. So a pre-filtration system of activated carbon is always needed with the reverse osmosis system.

  • Low TDS ( total dissolved solutes) value of water
  • Pure and clean drinking water
  • Long-lasting membrane life ( up to 3 years)
  • Removes all the contaminants, bacteria, cysts, and many viruses from water.
  • Clean, odorless water with good taste
  • Doesn’t remove chlorine and other volatile substances
  • Higher cost
  • Needs prefiltration system
  • Water tank for storage required



This filtration process works with the help of hydrostatic pressure to force water to pass through a semipermeable membrane. Further, it allows removing most of the contaminants from the water through the 0.01 microns to 0.05 microns hollow fibers. This membrane filtration method can not remove dissolved solids from the water. On the other hand, it is very sensitive to chlorinated water and purifies it efficiently.

Plus, the membranes with smaller hollow fibers can filter bacterial products and viruses from water. This method is preferred by industrial filtration plants and wastewater recycling plants.

  • Effective contaminants removal
  • Preferable for chlorinated water purification
  • Long life-span (up to 2 years)
  • Doesn’t remove dissolved materials
  • Doesn’t improve odor and taste
  • Suitable for low TDS water


This method uses ultraviolet light rays to disinfect water and kill bacteria and viruses present in the water without any harmful effect. This method doesn’t disturb the natural odor and taste of the drinking water. Moreover, it doesn’t need any additional chemicals to do the job.

However, water filtration is necessary with this method of purification to remove the additional contaminants.

  • Simple usage
  • Low budget
  • Convenient to use
  • Kills 99.9 % of microorganisms in water
  • Requires pre-filter
  • Needs electricity
  • Only kills microorganisms

Boiling or Filtering: Which Is The Best Way To Purify Water?

Best Way To Purify Water

Boiling or Filtering: Which Is The Best Way To Purify Water?

If you want to make sure the water you’re drinking is safe, there are two main ways to purify it: boiling or filtering. In this post, we will discuss the best way to purify water as well as its benefits and answer is it better to boil or filter water.

The water that we drink is a basic necessity of life, but it can also carry harmful contaminants that you do not want to be drinking. You can boil or filter water to remove contaminants like bacteria and viruses? Boiling water will kill most bacteria that are often found in the water supply, depending on the filter it may not remove bacteria and viruses but it will filter out sediment and heavy metals.

Boiling or Filtering

The boiling point of water is 100 degrees Celsius, or 212 degrees Fahrenheit and most bacteria cannot live for more than a few minutes above 70 degrees Celsius or 160 degrees Fahrenheit.

Boiling water is not only the most common way to purify it, but it is the oldest method. Our ancestors used this technique before germs were discovered! They understood that boiling water prevented illness and made the taste of boiled water enjoyable by adding leaves and herbs to it. Coffee was originally drunk as a pick-me-up during morning hours when people had no time for breakfast, while Tea began to be enjoyed after meals because of its medicinal properties which helped digestion.

So, without intending to do so, almost everybody starts their day by crudely purifying at least one mug full of water. Boiling water kills all bacteria in the water through heat and will make your water safe if there are no chemicals or heavy metals present. Rainwater is okay to just boil as it is likely not going to have many contaminants unless your roof has old tin or lead flashing, in which case boiling will be ineffective at removing the heavy metal contaminations. Boiling is also less effective against some viruses.

The upside: It’s easy! just flick the kettle on and let the water come to a rolling boil, ideally, the water should be boiled for at least 3 minutes. 

Interestingly, Beer was originally created to combat the water-borne illnesses that would ail people when they drank from potentially contaminated streams or wells. Early Ales had a very low alcohol content and were more like refreshing drinks than intoxicants. Hops were added to the beer not only for flavor but because of their antibacterial properties too!

What are the Reasons to Purify Drinking Water?

Boiling or Filtering

Before the water comes out of your tap it has sat in holding tanks and been through countless miles of metal, plastic and concrete pipes along the way it picks up bacteria, and dissolves metals, all of which end up in your water glass. In addition to that, town water supplies are treated with chlorine and often have fluoride added to them, neither of which is something that you should have in your daily diet.

Of course, the main reason somebody wants to purify water is to make it safe to drink and avoid getting seriously ill. You may be fooled into thinking that town water supplies are safe to drink.

Unfortunately, water pollution is not just something that happens in the wild or in third-world countries. Every year people in developed countries get sick from drinking contaminated water, the most famous recent example was the Hinkley groundwater contamination, that Erin Brokovich exposed and fought.

Pregnant women should avoid water that may carry harmful bacteria or viruses, and they need especially avoid heavy metals at all costs.

A pregnant woman’s baby is most vulnerable to harm from these things during the first trimester of pregnancy and can lead to birth defects such as cleft lip, heart conditions like arrhythmia (irregular heartbeat) and other health problems for their babies later in life so it is important not to take any risks with this type of drinking water.

Of course, there are just very sensitive to chemical imbalances and pollution. Some people who have certain conditions such as kidney disease, compromised immune systems, severely weakened muscles, or diabetes may need to take special precautions when they consume untreated water due to the potential increased risk of infection and illness. Eczema suffers often comment that when they drink town water without removing the chlorine their condition flares up.

Myths V’s the Real Benefits of Drinking Boiled Water

One of the downsides to purifying water by boiling it is that you need to wait for it to cool down after, however, if you can learn to enjoy the odd glass of hot water, you may just get some additional health benefits.

You may have heard people talking about the health benefits of drinking hot water,  and they are right there is some science behind what they say.

Hot water helps to stimulate your digestive system and increase metabolism, as well as aiding in the process of eliminating toxins from the body. Hot water is more readily absorbed by your body, it relaxes the digestive tract and allows for more rapid hydration.

Natural health advocates also say that hot water can help the body detoxify. When the water is hot enough, it makes you sweat. Sweating helps get rid of toxins and cleanse your pores.

Dangers of Boiled Water Purification

Besides the obvious danger of burning yourself when boiling water, there is a danger that you will actually concentrate the contamination if you build the water for too long.

Because boiling only kills bacteria and viruses and does not remove salts or heavy metals, The danger with boiling your water is if you are going to boil too long; then you risk concentrating salts and heavy metals instead of removing them from the water.

What are the Benefits of Filtered Water vs Boiled Water

Filtering your water helps remove contaminants that can’t be removed through boiling or other means. Some of the benefits are:

  • When you filter instead of boiling water to purify it you are removing salts and heavy metals and
  • Quality reverse osmosis filters will filters out up to 99.5% of bacteria, viruses, cysts, parasites, fungi, and most chemicals (pesticides) that contaminate water.
  • Boiling water for long periods of time will remove Chlorine, but reverse osmosis filters with a carbon stage have a better potential to improve taste due to the removal of chlorine or chloramine
  • Using a water filter may lower the risk of developing cancer-related illnesses from exposure to certain nitrates in drinking water sources.
  • Water filters can cost quite a bit of money, if you are not worried about heavy metal contamination then boiling your water mat be a suitable cheap way to ensure it is safe to drink.

Choose the Right Type of Filter:

Some filters may not be able to handle harmful substances like arsenic while others can! Cheap filters will remove sediment and some other non dissolved contaminants, even some dissolved metals, but a quality reverse osmosis filter really is the only option if you want to be sure you have nothing but pure water.

some people say they still feel better when they drink their tap water after running it through a jug filter which is more likely than not because the filter is charcoal carbon-based and the charcoal takes the smell out of the water, some also remove lime and calcium.

Does Filtered Water Need Boiling?

The purification process is designed to remove the bacteria and metals from water, which are both not healthy for people or animals to drink. For example, boiling kills the majority of harmful microbes in untreated water within a minute by heating it up enough that they cannot live; filtering removes many contaminants but leaves living organisms behind. Which method you should use depends on what you want out of the purified drinking water: if all pathogens such as viruses and protozoa need to be killed then boiling will work well because benchtop gravity filters can’t kill these things without additional chemical treatment (like chlorination); however, if just removing heavy metal ions like lead and copper is desired then filtration would be better since those don’t get removed by boiling.

The winner | Boiling v’s Filtering water

When it comes to the question of is it better to boil or filter water the answer is simple. Reverse Osmosis Filtering is better because boiling does not remove all organisms that could make you sick, while with a Reverse Osmosis filter more 99.99% of all contaminants can be completely removed from the water. Reverse Osmosis Filters are also much easier to use and take up less space than boiling pots of water for hours at a time in order to get pure drinking water.

There are many different types of Reverse Osmosis Filters on the market today that will purify your drinking water depending on what level of protection you need. See our Top 10 Best Reverse Osmosis System Reviews 2021 for a complete guide to choosing the right filter for your home.

Benchtop gravity filters are great and work well at removing sediment, limescale and chlorine, but they generally are not good at killing living things like viruses or protozoa so they may still be present in your purified drinking water if those are contaminants that must be killed; however.

Best Water Purification Tablets

Polar Pure Iodine

Best Water Purification Tablets

best water purify tablets

Drinking from a stream or an outdoor water source can be hit and miss which is why we recommend that you always purify your water to kill off any nasty germs and viruses by using one of the products on our list of the best water purification tablets in 2021.

Water purification tablets are becoming an essential part of many people’s backpacking and camping kits. They’re lightweight, easy to use, and most importantly, they’ll ensure that you never get sick from drinking water from a stream or other source while out in the wild! In this article, we will cover what water purification tablets are, why you need them when traveling (especially internationally), how they work, who should use them, what their benefits are, and which ones we recommend for purchase.

What Are the Dangers of Drinking Contaminated Water?

The World Health Organization estimates that every year, 3.4 million people die from diseases related to contaminated water and poor sanitation. Even the most pristine-looking water can have animal waste or a dead animal in it.

Consuming unclean water can quickly lead to illnesses such as diarrhea, dysentery, typhoid fever, hepatitis, and more. The best way to purify water is by using a filter or by purifying with water purification tablets.

You can kill most bacteria and virus contamination by boiling your water before drinking, but this requires a fire of some sort or something to boil the water in. If you want to be sure that you have safe drinkable water without all the hassle of waiting for it to cool down, your best choice is to carry water purification tablets that will work within 15 minutes to an hour with no hassle at all, they will work while you walk!

E-Coli, Cryptosporidium and Giardia: Key Facts

The most common waterborne illness that may affect campers is cryptosporidia, which may cause diarrhea and vomiting. Giardia cysts are also a potential invisible threat found in streams, rivers, and lakes.

E-coli can also be found in water sources, though it is less common than the other two types of illnesses mentioned above. If ingested, E-coli causes sickness similar to food poisoning: diarrhea and/or abdominal cramps accompanied by fever, chills, headache, lack of appetite, nausea, or even death if untreated.

The most likely risk that may come from drinking contaminated water is diarrhea and vomiting which can quickly lead to dehydration.

So What are Water Purification Tablets?

Water purification tablets are small packets of chemicals that you can add to your water, wait for a few minutes while they dissolve, and then drink. They come in different flavors and range in size but will typically treat half a gallon or 1 liter of drinking water per tablet. Making them ideally suitable for one person on the go who wants fresh-tasting, safe drinking water.

What Do Water Purification Tablets Do?

Water Purification Tablets are made to kill harmful bacteria in contaminated water taken from sources like lakes and streams using them will help keep you from picking up any nasty bugs. Great for taking on vacation, you never know when you might need them water purification tablets can be used anywhere from a hotel room to remote jungles – even when power is unavailable! They are even good to keep at home for when disaster strikes unexpectedly and your water supply may be compromised.

Choosing the best water purification tablet for your situation can be a bit confusing with so many options available on the market. In this article, we will review the 7 best water purification tablets available on the market today. We have reviewed these products based on four criteria: affordability, speed, ability to kill virus, parasites & bacteria, and taste.

1. Katadyn Micropur MP1 Purification Tablet:

The first product we recommend is the katadyn Micropur MP1 Purification tablets because they are affordable, and can kill viruses, parasites & bacteria.

MP1 Water Purification

The katadyn Micropur MP-I tablets use a combination of Sodium dichloroisocyanurate & Sodium Chlorite to create a deadly chemical reaction in the water releasing Chlorine Dioxide destroying any type of organic contaminant in your drinking water supply. 

It is recommended the tablet is added to the contaminated water and allowed to sit for 4 hours. After 4 hours the Chlorine Dioxide has killed all the nasties and has oxidized, evaporating out of the water leaving you with fresh, clean tasting water. 

The product is also FDA approved as safe for human consumption so you don’t have to worry about ingesting anything unsafe if you follow the manufacturer’s directions 

You can get packs of 20 or 30 individual purification tablets which should provide enough clean water for one person over many days if used properly (every day). Packages of these tablets are available on Amazon at an affordable low price point as well!

Another perk with the katadyn Micropur MP-I tablet is that it won’t leave any residue or odour in your water either!

The katadyn Micropur MP-I tablet has a shelf life of up 5 years from the date of manufacture, making them a must have in your backpack or go bag. 

2. Aquatabs:

Aquatabs water purification tablets are a good way to make sure you have safe drinking water while traveling, or even at home in the event of an emergency. 

Aquatabs- World's #1 Water Purification Tablets

They claim they are “The Best Water Purification Tablets in The World” We can’t say that we agree with them but it’s not like we disagree either. Unlike the other water purification tablets, which use both Sodium dichloroisocyanurate & Sodium Chlorite, whereas Aquatabs only contain Sodium dichloroisocyanurate. However, each tablet is over 16% pure Sodium dichloroisocyanurate which 16x more than most other tablets on the market.

So they are effective in a fraction of the time, the manufacturers claim water is purified in 30 minutes. 

Besides being very effective at killing all the nasties, aquatabs are packaged in easily transportable tear off strip packs, that pack neatly in any back, hardly taking up any room at all. 

The only downside of these tablets was they didn’t taste very good. It left a heavy chlorine aftertaste which wasn’t pleasant to drink at first. 

However, if you are in the situation where you know that the water quality is really bad and you want 100% assurance there are no hazards, then these tablets may be just right for you.

We would recommend them for people who didn’t want to carry around bulky water bottles and those looking for a quick solution to their water needs on the go. 

Water purification has never been easier than with these tablets!

3. Polar Pure Iodine Drops:

Polar Pure Iodine

Okay so Iodine drops are not technically a water purification tablet, they are drops. But they are extremely effective and completely eliminating all viruses and bacteria. Plus they are very easy to use and work much faster than most other forms of tablet purification

The difference between chlorine based tablets and iodine drops is that chlorine is good at killing bacteria, but not viruses. Iodine on the other hand kills both bacteria and viruses – even in very low concentrations.

Polar Pure purification system contains iodine drops that kill 99% of all waterborne pathogens such as; Giardia, Cryptosporidium, and E-coli within 15 minutes! This type of purification will make your drinking water safe to drink, and the bottle will last for about three years without

There are a million ways for our drinking water sources to be contaminated by contaminants or viruses which can lead to any number of illnesses from deadly Hepatitis A all the way down to just getting sick like your average cold, and when attempting to survive in a dangerous situation, even the smallest chance of illness can be a matter of life or death.

The downside to using Polar Pure iodine drops, (or any iodine drops)  for water purification is that the taste and smell of iodine will remain in your water for a period of time, usually about 24-48 hours.

So if you can’t stomach drinking straight water with a medicinal, disinfectant taste to it then Polar Pure Iodine drops may not be to your liking. Even though these drops require less time than using water purification tablets, they do have similar drawbacks like an unpleasant aftertaste or odor, and also leave traces of themselves in the water so it is really a matter of personal preference. 

It is recommended that you try both drops and tablets at home before taking them on a trip so that you can decide which of them is your preferred water purification method. Or take both with you, they are so small and light it won’t be a burden to carry them both

Note Iodine can cause health issues such as goiter or hypothyroidism, in some people, it is also important not to use any iodine based water purification if you are pregnant.

4. Rotoco Chlor-Floc Water Purification Tablets | Military Grade:

The Rothco company is a well-known global brand and has been making products for soldiers in the US military since 1953. The US military uses Rothco Chlor-Floc water purification tablets to provide them with safe drinking water, these tablets are available for purchase by the public.

They have sold over 1.5 million units, making them one of the best selling water purification tablets on the market.

The tablets are sold in a box of 30, with each tablet able to purify either one quart or one liter of water depending on the temperature. The US military uses these because they can’t risk drinking contaminated water and getting sick while deployed overseas.

You will love the Rothco water purification tablets!! It is easy to see why they are the choice for the military.

Lightweight and compact (compared to other methods of purification). I’m sure you are like me and prefer to carry something lightweight, especially if it is only going to be used in a survival situation. they are easy to carry in your canteen pouch and in your “Bug out Bag”. They highly recommend them to anyone building a survival bag, hiking preparedness, or any outdoor enthusiast. Good to keep some of these around (you never know). Good price also!

Just note that the expiry on these is not as long as some other water purification tablets, we are sure that they would be safe to use long after the expiry, however, it is always best to follow manufacturers’ directions.

5. Aquamira – Chlorine Dioxide Water Treatment Two Part Liquid:

Aquamira Water Treatment

The last water purification drop we will cover here is the Two-part Water treatment drops by Aquamira. This revolutionary two-part system comes with water treatment drops that not only purify dirty drinking water the kill odor-causing bacteria and enhance the taste of stored potable water.

What makes Aquamira different is it uses a chemical reaction between the Chlorine dioxide and the acid to create nascent oxygen, a highly active form of oxygen, which is a strong oxidant and a powerful germicidal agent. This same chemical reaction has been used since the 1940’s to make municipal water safe to drink.

It kills pathogens without harming humans because it does not create potentially harmful by-products like chlorine and other halogens (such as iodine) do.

The bottles have a 4-year shelf life from the manufacturing date, and can treat up to 30 gallons at once, and are easy to use. Oh, did I mention there is little to no aftertaste! That’s right because that is a common complaint of other water treatment drops.

The Aquamira system uses chlorine dioxide to create an effective, yet a safe product that you can trust while in the backcountry or at home during emergency situations!

Their instructions are simple: open pack and add one part A (drops) per four parts B (tablets). Stir them together until dissolved completely and wait 15 minutes before use. 

To store this purified drinking water for future use, pour it into another container with a tight-fitting lid and date marked. Note; do not be tempted to pre-mix up two bottles because they will not be effective, as the chemical reaction will have already started before you get it into the water.

You can even use these drops to sanitize reusable masks. Just place the mask in a zip lock bag, take a small cup and add a few drops of each part A & B, then seal your mask inside with that concoction for around 20 minutes. The gas created by those solutions will sterilize most viruses and bacteria!

FAQ’s Frequently asked questions about water purification tablets and drops.

What are water purification tablets?

Water purification tablets are a chlorine-based product that will remove the most harmful bacteria and make water safe to drink.

The only downside is the taste of these products can vary depending on which brand you use, but they should be easily palatable for most people. There are also water purification drops, they typically come in two different parts – Part A contains Chlorine Dioxide, while part B is Sodium Hydroxide (NaOH) 

These solutions need to be mixed together by thoroughly shaking them before using them as instructed below:

Part A + Part B + contaminated water = Purified Drinking Water!

There are also other kinds of chemical-based water treatment such as iodine that may work better if you’re not into the idea of drinking chlorinated water, however, for ease of use and shelf life chlorine-based water purification tablets are the number one choice.  

Why do you need to use water purification tablets and drops?

The answer to this question is pretty simple – you need them because water not sourced from a town water supply may contain various contaminants that could pose health risks. 

There is also an ever-growing risk of Natural disasters, causing contamination to the public supply due to industrial accidents or natural causes such as flooding can all lead to potentially dangerous levels of a number of toxic compounds and bacteria which are harmful to humans if ingested.

Not only do these tablets remove almost all nasties they typically have a long shelf life so make a great addition to your emergency kit!

How do water purification tablets work?

The answer to this question is also pretty simple – they work by using a chemical process that removes most of the harmful contaminants in water such as giardia, cholera, salmonella, cysts, and more. 

Most tablets will kill 99% or more of all bacteria present on contact without requiring a long waiting time for them to take effect! 

It’s not just toxic bacteria either with some tablets being able to remove up to 98% of viruses too. 

This means you can get rid of almost anything nasty in even the dirtiest waters through these products which makes them an excellent way to ensure safe drinking water no matter where you are at any point in time.

What are the main types of water purification tablets?

There are two main types: Those which use chlorine dioxide gas (sodium hypochlorite) as an active ingredient; or those that release nascent iodine particles into solution when dissolved in liquid. Both work well but require different amounts of time before they are fully effective. 

One is a combination product that includes chlorine and other chemicals to create a chemical reaction, releasing gasses to make sure any harmful bacteria, viruses, or parasites get killed off quickly. 

The second one relies solely on chlorine chemical treatments which allows you to add it directly into your drinking water supply typically these are not capable of eliminating viruses. 

In addition to tablets, there are iodine drops which are a more cost-effective option and rely on chemical treatments to kill off the bacteria, viruses or parasites.

Chlorine tablets that come in tablet form are generally not well suited for higher elevations due to the lack of oxygen at these altitudes but iodine tablets might be able to get rid of impurities without any problems. 

Are water purification drops better than tablets?

These two different types of water purification methods have their own advantages and disadvantages, but for most people, the best option would be iodine drops because they are more effective at killing viruses than tablets. Chlorine drops come in larger quantities at lower prices making them much better suited for long-term use as well as when traveling overseas where many travelers bring a few sheets of tablets bottles with them because even drinking tap water in some countries might not always be advisable. 

Who should use water purification tablets?

Water purification tablets are a good option for people who want to be able to ensure they can have safe drinking water in the event of a disaster, or while camping in the wilds. They also are a must-have if you are a traveler in third-world countries or areas where the tap water is not safe.

Where can I buy water purification tablets?

You can buy water purification at most good outdoor stores, but the price in retail stores can be quite high. That is why we recommend comparing it to the price available on Amazon, you can usually save 50%

Are there any side effects or risks of using water purification tablets?

Yes. Although it’s rare, people can have a bad reaction to the chemicals in water purification tablets and should stop taking them immediately if they notice any symptoms such as rashes or swelling of the skin around the mouth or throat. 

If you are pregnant or breastfeeding we recommend sticking with bottled drinking water instead of using these products because it is possible that your baby could experience some side effects from the chemical compounds used by water purification tablets. 

It is up to you to weigh the risks, are you more likely to get seriously ill from drinking contaminated water? Almost certainly the answer is yes. But use common sense and make sure you understand what those risks may be before making a decision about which product best suits your needs!

Do water purification tablets filter dirty water?

The answer to this question is a resounding no. Water purification tablets are not meant as an alternative to boiling your drinking water or using other filtration methods. They function very differently from a water filter that removes dirt and contaminants. 

They offer a convenient and safe way to ensure that the water is safe from bacteria, cysts, and some viruses, they will not remove harmful contaminants such as lead, mercury arsenic. 

Do water purification tablets leave a bad taste?

Yes and no… Some water purification tablets leave a neutral taste with little to no after-taste. Whereas some leave a chlorine taste or medicinal iodine after taste. Try a few until you find one that you are happy with. We found that the  Aquamira Two Part Liquid drops left the least aftertaste.

What are the benefits of using water purification tablfets?

Water purification tablets offer a portable and convenient way to ensure that the water is safe for drinking in most normal situations. They are lightweight, easy to carry in your pack or purse. Compared to other filtration systems they are less bulky and more cost-effective – meaning you can use them when traveling abroad more easily than larger filters with long filter life cycles. 

What should I consider before purchasing water purification tablets or drops?

The key things you need to keep in mind when choosing a tablet is whether it leaves an aftertaste (some people find this unpleasant) as well as how effective it will be against bacteria and viruses. 

How long do water purification tablets take to work?

Each water purification tablet has a different time period for effectiveness. Some will give you safe drinking water in 15 minutes, others can take up to 4 hours. Typically the longer the time, the more effective the tablet is at killing a broad range of contaminants. 

How long do water purification tablets last?

The shelf life of water purification tablets in aluminum sheet tabs is up to 5 years, water purification drops tend to be shorter, around 2-3 years due to potential evaporation. Always read the manufacturer’s expiry date, and if in doubt just get a new packet, they are really cheap and could save your life.  

Can you use iodine drops when pregnant?

In short, no! Most health professionals recommend pregnant ladies avoid too much iodine while pregnant. Iodine in pregnancy has been linked to a higher risk of miscarriage, birth defects, and stunted brain development. 

But if you are in a life-threatening emergency then yes! If you are pregnant and have no option but to drink water that could be contaminated, then it is safer to use an iodine drop to kill the bacteria and viruses than it is to potentially expose yourself to them. 

What can I do if my tablets don’t dissolve?  Some tablets take time to dissolve so just stir the tablet slowly until granules turn clear. This could be up to 30 minutes but typically after 15 minutes, all the particles will be fully dissolved.

What is a water distiller

What is a water distiller

What is a water distiller

A water distiller is a process of removing impurities from water. In this process, it converts water into the vapours and then condenses it to the liquid state. Due to the evaporation process, it removes impurities, bacteria, and unnecessary minerals such as fluoride, arsenic, and other minerals. Moreover, the distiller converts the water into vapours due to which the minerals left behind. Later on, the distiller condensed the vapours to the liquid state.

What is a water distiller

How Water Distiller Works

Just like the natural phenomenon, the water distiller works similarly. Let’s have a look at the working of the water distiller.

  1. The water distiller boils the water and turns it into the water vapours. 
  2. When the water changes to steam, the minerals remain to settle down.
  3. After that, the water distiller condenses the vapours to get the water.

Initially, the water is poured into the boiling chamber, which is attached to the heating element. This heating element will raise the water temperature, which will turn the water to vapours. Moreover, the top of the chamber contains the opening, which will let the vapours cross through it.  The water crosses the chamber’s opening then enters into the condenser. Later on, the condenser will condense the water vapours to the water.

Above all, there is a fan that cools down the vapours into the water droplets. This condensed water will pass through the filter, which will remove the impurities from the water droplets. At last, the active carbon will remove impurities from the distilled water, then you can use it.

In case, you might be asking yourself, how much time will be consumed for water distillation?

Let us explain the time consumed by the water distillation process.

Time is taken by Water distiller:

Water distiller takes 4-6 hours to purify the water. It will clean a gallon of water in 4-6 hours. So, you can easily get a gallon of water by using the water distiller. Most of the water distillation process takes around 4-6 hours to remove minor impurities. Above all, the water distiller is the slow process. Moreover, the water distiller removes impurities from one drop of water at a time due to which it takes a lot of time. Above all, most of the distilled water is automatic and removes the impurities from the water.


You may wanna know the benefits of distilled water.

Benefits of Distilled water

After the distillation of water, you can the clean and pure water for drinking purposes. The water comes from pipelines, which contain impurities that need to be removed. So, the water distiller removes all impurities and metals from water. So, you will get pure water.

The use of distilled water is not limited to drinking. You can use it for cooking and humidifiers. Moreover, you can use it for making baby formula because distilled water is free of bacteria and impurities. Above all, if you are worried about the strain on the window then you should use distilled water to remove such impurities.

 But wait, let me tell you something. 

Although it has many benefits there are some disadvantages as well. Let’s have a look at the disadvantages of the distilled water given below.

Disadvantages of Distilled Water

  • Vapid taste of distilled water is due to the removal of minerals from the water. Because the distilled water is low in oxygen. Moreover,  it is not good in taste but it is safe as compared to tape water.
  • The water distiller removes impurities but very slowly. Moreover, it converts a single drop into vapours at a time due to which this process is time-consuming.


That’s it guys, it is all from my side. I hope you find this article useful for you. Distilled water is safe for drinking and cooking purposes. Moreover, drinking distilled water is not bad for your health but it is a time-consuming process. If you have any queries do ask me in the comment section given below.

How To Remove Iron From Bore Water

how to remove iron from bore well water

Epic Pure Water filter Pitcher Review

Drinking clean water will increase energy and help weight loss. Moreover, it will also improve skin complexity and maintain regularity in your life. You can get bore water from the ground, which is available in soil and rocks under the earth. Furthermore, it may contain minerals that may cause borne diseases. Contaminated water may cause gastroenteritis and diarrhea.


Iron is available in water, which shows that the water from underground mountains that’s why it contains iron. The question arises how can you remove iron from bore well water. Let us see the methods to remove iron from bore well water.

Methods to Remove Iron From Bore Well Water

There are many methods to remove iron from the bore well water. Let see the methods given below:

Shock Chlorination:

Shock chlorination is the method of removing minerals from water by using chlorine or bleach. It is a widely used method of removing contamination from water.

  1. First of all, you need to remove debris from the water. Turn the circuit breaker off and remove the cup off. 
  2. Now, pour the 3 pinches of chlorine into water and into the well as well. 
  3. Now, mix the chlorine well in the water.
  4. After that, you need to circulate the mixture inside and outside the well. 
  5. Now, you have to flush the container from inside and outside.
 But Wait! 
how to remove iron from bore well water

When you use shock chlorination, the bacteria may reoccur again. So, let us discuss the other methods to remove iron from the water.

Chemical Oxidation:

Chemical oxidation is the process of involving electrons from the reagent to oxidize the water. Moreover, it is the process of converting pollutants into soluble products. Chemical oxidation takes place in a natural way to remove contamination from the water. Furthermore, the purpose of chemical oxidation is the breakdown of hard particles to soluble particles.

 But wait! Let me tell you something. 

The use of Chemical oxidation increases the pH of the water. So, let us explore some more techniques to remove iron from borewell water.

Oxidation Filtration:

Oxidation filtration is the process of removing iron and magnesium from water. Moreover, the process involves the oxidation of iron into the soluble product then removed by using the filtration method. In groundwater, there are iron and arsenic in large amounts and you have to remove them without doing this, you may get much illness.

Now! You may think that how could you perform such a tough job? But wait we are providing you some filters, which are performing this job more effectively. Let us explore some of them.

Iron removing filter:

As technology evolved so much that you can easily do your job easily without spending much time on it. So, let’s explore some of the iron removing the filter from water.

iSpring FM25B:

This amazing gem is especially for reducing iron from the water. Moreover, it will reduce iron up to 3ppm to 0.01 pom. With high sustainability and performance, it becomes Amazon’s choice.  Above all, it is made under FDA standards and tested by a third party to get the best results.

Do You Sparetime to Think About Why it is Necessary to Remove Iron From Water?

Having an excess of iron in water may have several effects on your life. Let us discuss a few of them, which are as follows.

  1. It may affect the taste of food and beverages. 
  2. Iron will add unpleasant, blackish to food. 
  3. Furthermore, It will cause strain in the bathroom.
  4.  If your body absorbs too much iron it will cause serious damage to it.


In short, the removal of iron is quite essential for us. Moreover, drinking clean water increases your health and growth as well. So, remove the iron before drinking and understand the presence of minerals present in water. Above all, you can remove the minerals by using the latest technology such as iron removal filters. If you have any queries, do ask in the comment section.

Benefits Of Water Filter System For Your Family Office

Water Filter Benefits

Benefits Of Water Filter System For Your Family Office

Water filters made our life smooth and sound nowadays. As a matter of fact, we need water to endure. Likewise, earth humans also comprised of 70% water, which is bound in the cell layers.

Water is a higher priority than food a person can go as long as a month without food, yet can just endure seven days without water. Making it even more significant that we drink purified and clean water. In the event, water isn’t dealt with, separated, or cleaned, it can make you sick and cause many diseases. In short, the water filter is an essential thing that benefits in many ways. Water filter benefits both humans and the water supply osmosis system of your house.

So, here in this article, we are going to highlight some essential water filter benefits.

1. Cost-Effective; saves money

The first and foremost benefit of water filter is money saving as compared to the water bottle. As you only have to install the water filter or water softner once in your house or place and you can get gallons of water. Other than this, if you have no water filter then definitely you have to spend on water bottles.

According to research, there are 10.9 billion gallons of water bottles used in the USA annually. And more specifically, the water bottle use in California is 3.09 billion gallons that are definitely higher than other states. This definitely is not cost-effective and safe for the environment.

In conclusion, bottled water is 30 percent more costly than a water filter. Regardless of whether you’re getting it by the bottler or strictly purchasing a jug for each day, you are greatly overspending contrasted with the cost per liter you get from a water filter. This budgetary advantage of clean water sets aside your cash as well as gives you a similar reviving taste you anticipate from filtered water, directly from your tap.

2. Water filter save good minerals and removes bad minerals

Water filtration eliminates water contaminations and risky contaminants, for example, chlorine, sterilization side-effects, and hefty metals, for example, mercury, lead, and arsenic. Simultaneously, water filters keenly guarantee that significant minerals, for example, magnesium, fluoride, calcium, and zinc are held.

They shield you from poisons and guarantee that you expend solid minerals. Water filters additionally forestall limescale. As we all know, The US Council of Environmental Quality once found that disease hazard was 93% higher among the individuals who were presented to chlorinated drinking water. The water filter also maintains a good pH level that protects human pepsin and gives a good digestive system.

3. Water filter and Health benefits

Water filters are also very useful for your health and wellbeing. There are many advantages related to water filters like skin hydration, supplement retention, weight reduction, detoxification, assimilation, and a decrease in the danger of malignancy. Drinking pure and filtered water assists in supporting the immune system and better mental health.

So, all in all, you can tackle many health-related issues from skin infections to weight loss. You just have to spend on water filter system. This also saves your money from much medical health care.

4. Low maintenance

Water filters are helpful and simple to utilize. Water filtration items are strong, convenient, simple to change for fast filtration, and are low upkeep. Even you can change your water filter cartridge on your own in few very simple steps.

5. Good for environmental biodiversity

Filtered water is definitely a source of pure and clean water and if you use bottled water then it may benefit you but not our environment. As already said, in California 3.09 billion gallons water uses annually which for sure gives us a heap of wasted plastic bottles.

And these non-decomposable bottles stuck in our environment affecting our soil, plants, seas, and damaging biodiversity. In conclusion, you can save the environment by using eco-friendly water filters and can get tasty and healthy water at a low cost.

6. Improved Hydration level

Last but not least, the key upgrades a faucet water filter can make to your drinking water worth drinking by giving you clean water and improving hydration levels. A recent report in the Journal of the International Society of Sports Nutrition found that drinking mineral-based water improved the hydration levels than tap water in the time period of two weeks.

Alkaline water filters can upgrade the mineral substance of your water alongside improving its pH level importance a far prevalent degree of hydration than fundamental tap water.

In short, a water filter can benefit you finically, medically, in terms of health and saving the environment. All you have to do is to install a good water filter project at your residence, business place, and public places also.